News

Here at 493K we offer all the tools needed to help monitor the Rotational Moulding process, from thickness measurem… https://t.co/vs9qAavnLE

RotoRocket is great for multilayer test samples and checking compatibility between materials. Also great for lookin… https://t.co/KFEy1CoMpt

A closer look at one of the RotoRocket samples we made last week. With this sample, we used talcum powder to highli… https://t.co/aBrqJ41Yh5

What is K-Face? K-Face Basic is an LCD screen Temperature Alarm Interface that displays the temperature on one channel to the machine operator. This alerts the operator as to when the mould is ready to be removed from the oven (or, in the case of an open-flame machine, when to turn off the gas) and […]

Busy day yesterday here at 493K making up some samples using the RotoRocket! 🚀 #rotomolding #rotomoulding #493kltd https://t.co/weTfiQs8cv

K-Label – Vent Mounted, Peak Temperature Recorded, Certified And Filed… Job Done. 🌡 #493k #rotomoulding #rotomolding https://t.co/B7EgULWxuX

Vent Mounted, peak air temperature recorded. Certified and filed… job done. Numerous studies have demonstrated that the peak internal mould air temperature gives a good indication of the state of the rotomoulded part. K-Label provides a simple quality control method to check that the moulding has obtained correct cure and avoided under or over curing. […]

RotoRocket – Now capable of moulding hexagonal samples! 🚀 #493k #rotomoulding #rotomolding https://t.co/fWK88fkOTd

A uni-axial benchtop rotational moulding machine, complete with glass mould and an optional hexagonal mould! demonstrate – educate – experiment Experience the rotomoulding process, as rarely seen before, through the RotoRocket’s unique glass mould. The RotoRocket comes complete with integrated heaters and temperature monitoring.  This means that a full rotomoulding part can be made and observed not […]

Reduce cycle times, optimise processing, know what’s going on inside your mould… K-Paq is a 4 channel portable device that conveniently attaches to a rotational mould. It will measure mould pressure via the vent pipe and mould temperature via type K thermocouples. Done in real time, the moulder will now be able to identify faults immediately and […]