Are you a stone cold rotomoulder?

A brief review by Dr. Gareth on Beologic’s bio-based rotomoulding composite: Basalt & PE!

What could you rotomould with this?

For more info drop us a line: sales@493k.com

Our technicians have been working on a K-Paq service and repair over the last few days! 👨‍🔧

Our technicians have been working on a K-Paq service and repair over the last few days! 👨‍🔧

Is your K-Paq due a service… https://t.co/km7CDztDqN

Did you know the K-Metron can measure the thickness of foamed roto parts? As well as all other non-ferrous material…

Did you know the K-Metron can measure the thickness of foamed roto parts? As well as all other non-ferrous material… https://t.co/ul2HrP5svH

493K Are Back On The Road Again…!

493K are back on the road again. In the coming months we will be visiting Dusseldorf & Atlanta. Drop us an email or send us a message on LinkedIn to arrange a catch-up!

No alt text provided for this image
No alt text provided for this image

Dr. Gareth will be at the K Show, Dusseldorf, Germany from 19th – 26th October. 

No alt text provided for this image

Dr. Gareth will be at the ARM Fall Meeting, Atlanta, Georgia from 6th – 9th November.

Get in contact with us now if you’d like to arrange a catch-up with Gareth at either of the events by emailing sales@493k.com or dropping us a message on LinkedIn!

3D Printing a prototype for a new high precision K-Metron thickness measurement gauge! Coming soon! 📏 👀 #493K…

3D Printing a prototype for a new high precision K-Metron thickness measurement gauge! Coming soon! 📏 👀 #493Khttps://t.co/nTAxtxJzRt

Here at 493K we offer all the tools needed to help monitor the Rotational Moulding process, from thickness measurement…

Here at 493K we offer all the tools needed to help monitor the Rotational Moulding process, from thickness measurem… https://t.co/vs9qAavnLE

RotoRocket is great for multilayer test samples and checking compatibility between materials…

RotoRocket is great for multilayer test samples and checking compatibility between materials. Also great for lookin… https://t.co/KFEy1CoMpt

A closer look at one of the RotoRocket samples we made last week. With this sample, we used talcum powder to highlight the porosity with a dark colour!

A closer look at one of the RotoRocket samples we made last week. With this sample, we used talcum powder to highli… https://t.co/aBrqJ41Yh5

K-Face – Mould Temperature Alarm Interface For Operators

What is K-Face?

K-Face Basic is an LCD screen Temperature Alarm Interface that displays the temperature on one channel to the machine operator. This alerts the operator as to when the mould is ready to be removed from the oven (or, in the case of an open-flame machine, when to turn off the gas) and when to exit the cooler.

It also has one further intermediary alarm in the oven which can be used to tell the operator when to drop the second shot of material and one alarm in the cooler which could be used to tell the operator when to turn the compressed air on, say for internal mould cooling. It is a self-contained box that can sit by the control panel.


Why not give us a follow on our LinkedIn Page?